HAC8FS-Q ADA 220V/50HZ (SS)
elf-contained, electric refrigerated wall-mounted water cooler easily accessible to physically challenged individuals. When properly installed, unit meets state and federal requirements for both children or adults as defined by the Americans with Disabilities Act. Unit is certified to NSF/ANSI 61, and meets requirements of the Safe Drinking Water Act. Unit provides 50° F water at 80° F inlet water and 90° F ambient. The cabinet is made of stainless steel panels that resist wear and corrosion. The durable satin finish helps hide water spots and fingerprints. The cooler has a non-corrosive stainless steel cooler top with a satin finish. It is resistant to stains and corrosion and is easy to maintain. The cooler top's anti-splash ridge reduces splatter and its contoured shape insures proper drainage. The exclusive one-piece, chrome-plated two stream mound-building bubbler with non-removable anti-squirt feature and integral hood insures a satisfying drink of water. The cooler features self-closing, light-touch push bars on the front and sides with raised letters for the visually impaired. This cooler also features a Stainless steel evaporator/storage tank for long life. The waterways are certified to NSF/ANSI 61, far exceeding the requirements of the Safe Drinking Water Act. The refrigeration system features a hermetically sealed, positive start compressor with lifetime lubrication and built-in overload protection. The refrigeration system's self-lubricated fan cools the copper/aluminum condenser. The system uses R134A refrigerant. This cooler will deliver 8.0 GPH of 50° F water at 90° F ambient and 80° F inlet water. It is furnished with a plug-in, 3-wire grounding type service cord. Water supply inlet is 3/8-Inch. Waste outlet is 1-1/4-Inches.
Halsey Taylor Stainless Steel Water Cooler 8 GPHSKU: HAC8FSQ-SSPremium-quality coolers have a waterway system with stainless steel tanks, copper components, and lead-free materials; an easy-to-clean strainer traps particulates before they enter the cooler. Units feature permanently lubricated compressor and fan motor, refrigeration system dryer, and a splash-resistant stainless steel, multilevel basin. Separate, easy-to-access sanitary controls. Nonpressurized cooling tank on single-level units minimizes water damage in case of rupture. Preset temperature control only requires altitude adjustment. In-line flow regulator maintains constant stream height at line pressures of 20 to 105 psi. Removable front panels allow easy access for maintenance. P-trap not included; Units with a mechanical push bar can activate a stream of water in the event of a power outage.Inlet connection: 3/8" O. D. tubingDrain outlet: 1-1/4" dia.Refrigerant HFC134A (CFC free)115VACCapacity of 50 degree F drinking water based upon 80 degree F inlet water and 90 degree F ambientWater Cooler, Single-Level, 8 GPH, Platinum Color, Height 19 9/16 In., Width 18 1/4 In., Depth 18 5/8 In., Indoor Mounting Location, Compressor 1/4 HP, 115 Voltage, Inlet 3/8 In Outer Diameter Tubing Connection, Connection Drain 1 1/4 In., 134A (CFC Free) Refrigerant, Water Temp. 50 Deg. F, ADA Compliant, Standards ANSI/NSF61, Section 9, ADA Compliant, Warranty Length 5 Year On Refrigeration System And 1 Year Electrical Components And Water SystemImages may not reflect the actual product delivered and should be used only as a general guide. Dimensions, colors/finishes, design, and style may vary.