Modular, electric refrigerated, bi-level wallmounted water cooler designed to be easily
accessible to physically challenged and ablebodied individuals. When properly installed, unit
meets state and federal requirements as defined by the Americans with Disabilities Act. Barrier
walls required or apron installed to meet 27 cane touch prerequisite. Unit is certified to NSF/ANSI 61 and meets requirements of the
Safe Drinking Water Act. Unit provides 50° F water at 80° F inlet water and 90° F ambient
All Aquaverve bottleless coolers include an NSF approved dual filtration system. The filtration system has a rated capacity of 3,000 gallons. While this capacity is typically well in excess of most location’s usage, Aquaverve incorporates the extra capacity in order to insure that the filters only need to be changed once per year. The Aquaverve filters are designed to produce the finest drinking water available.
Filtration consists of activated carbon and sediment filters and remove chlorine, lead, pcb's, chemicals and pesticides, cysts, sediment, and any off flavors and odors. These filters are ideally suited to producing the highest quality drinking water while not stripping the water of the natural minerals.
Once you have your water line in place (1/4 inch outside diameter tubing) it takes only 10-15 minutes to install the cooler following our simple step-by-step instructions. And best of all, no tools are required so anyone can easily complete the installation. No drain needed!